We think "The Mule Fiberglass Corner and End Systems" are the ultimate Mule Posts, Easy Installation corner and end posts. They are strong, attractive, easy to install, non- conductive, non-corrosive and will last a very-very long time with no attention or maintenance. There is the added benefit that you do not have to dig a hole to install them. The Mule Corner and End Systems can be used for all equine fencing projects, and also with regular 12.5 hi-tensile wires for cattle fencing.
The Mule System is extremely easy to install. The fiberglass members are approximately 2" diameter with about a 1/4" wall thickness. They are very stout. Everything is pre-drilled and ready to put together. Just follow the simple steps. The vertical corner post is also pre-drilled with 2" on center hole spacing, you then use a 2" U clip to hold the line from moving up or down on the post. The hardware pack includes bushings that slide inside the bottoms of the vertical and angle braces - then attach to the auger. The angle braces attach to the vertical posts via galvanized clamps that secure in place. This corner can easily be installed on hillsides or uneven terrain.
Mule Fiberglass Corner and End Systems are the final answer for corner and end posts. Strong, attractive, easy to install, non- conductive, non-corrosive, no maintenance. No digging - post attaches to auger.
Mule Posts Price List
|Cotter Pins||12.5 guage - 5.5" 100 per pkg||$ 9.50|
|Mule Augur Anchor Install Tool||$126.00|
|Mule Double Brace Corner System 4 or 5 ft high||4ft.|
|Mule Single Brace End System||4ft|
|Sunguard Fiberglass Line Posts, White, Predrilled||1/2" x 4' drilled|
2/3" x 5' drilled
2/3" x 6' drilled